- Member Technical Support Staff (MTSS) ES-V
- Administrative Officer (A-V)
- Assistant (A-IV)
Three years Diploma in Electronics / Computer Science / Information Technology / Telecommunication or Bachelor in Electronics/ Computer Science / Computer Application / IT) or possessing DOEACC 'A' level certificate with two years’ experience.
Educational Qualification for Administrative Officer
Graduate in any discipline from recognized University with six years’ experience in the field of personnel / administration / vigilance or Post Graduate in any discipline from a recognized University with four years’ experience in the field of personnel / administration / vigilance.
Desirable: Diploma in Personnel / Financial / Purchase Management
MBA from recognized Institution / University with one year experience in the field of personnel / Administration / vigilance.
Educational Qualification for Assistant
Graduate in any discipline from a recognized University with four years’ experience in the field of personnel/ administration / finance / vigilance etc.
Post Graduate in any discipline from a recognized University with two years’ experience in the field of personnel / administration / finance / vigilance etc.
Written Examination Syllabus for Member Technical Support Staff
- General Intelligence & Reasoning - 20 marks
- General Awareness - 20 marks
- Numerical Aptitude - 20 marks
- English Comprehension - 20 marks
- Technical area (specific to STPI) - 70 marks
Time duration of the paper will be 2 ½ hrs.
Written Examination Syllabus for Assistant & Admin Officer
- General Intelligence & Reasoning - 25 marks
- General Awareness - 25 marks
- Numerical Aptitude - 25 marks
- English Comprehension - 25 marks
- Knowledge of Central Government Rules and Procedures / Instructions - 50 marks
Time duration of the paper will be 2 ½ hrs.
General Intelligence & Reasoning SyllabusIt would include questions of both verbal and non-verbal type. This component may include questions on analogies, similarities and differences, space visualization, spatial orientation, problem solving, analysis, judgment, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning and figural classification, arithmetic number series, non-verbal series, coding and decoding, statement conclusion, syllogistic reasoning etc. The topics are, Semantic Analogy, Symbolic/ Number Analogy, Figural Analogy, Semantic Classification, Symbolic/ Number Classification, Figural Classification, Semantic Series, Number Series, Figural Series, Problem Solving, Word Building, Coding & de-coding, Numerical Operations, symbolic Operations, Trends, Space Orientation, Space Visualization, Venn Diagrams, Drawing inferences, Punched hole/ pattern-folding & un-folding, Figural Pattern - folding and completion, Indexing, Address matching, Date & city matching, Classification of centre codes/ roll numbers, Small & Capital letters/ numbers coding, decoding and classification, Embedded Figures, Critical thinking, Emotional Intelligence, Social Intelligence, Other sub-topics, if any.
General Awareness SyllabusQuestions in this component will be aimed at testing the candidate’s general awareness of the environment around him and its application to society. Questions will also be designed to test knowledge of current events and of such matters of every day observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Policy & Scientific Research
Numerical Aptitude SyllabusThe questions will be designed to test the ability of appropriate use of numbers and number sense of the candidate. The scope of the test will be computation of whole numbers, decimals, fractions, and relationships between numbers, Percentage, Ratio & Proportion, Square roots, Averages, Interest, Profit and Loss, Discount, Partnership Business, Mixture and Allegation, Time and distance, Time & Work, Basic algebraic identities of School Algebra & Elementary surds, Graphs of Linear Equations, Triangle and its various kinds of centres, Congruence and similarity of triangles, Circle and its chords, tangents, angles subtended by chords of a circle, common tangents to two or more circles, Triangle, Quadrilaterals, Regular Polygons, Circle, Right Prism, Right Circular Cone, Right Circular Cylinder, Sphere, Hemispheres, Rectangular Parallelepiped, Regular Right Pyramid with triangular or square base, Trigonometric ratio, Degree and Radian Measures, Standard Identities, Complementary angles, Heights and Distances, Histogram, Frequency polygon, Bar diagram & Pie chart.
English Comprehension Syllabus
Candidate's ability to understand correct English, his basic comprehension, and writing ability, etc. would be tested.
Technical AreaCommon for Physics, Maths, Electronics, Electronics & Communication, Computer Science and IT: ALGEBRA Determinants and Matrices: Definition, Order, Expansion of 2nd & 3rd order Determinants, Cramer's rule, Determinant value of a square matrix. Singular and non singular matrices, Adjoint of a matrix. Problems, Cayley - Hamilton's theorem, Inverse of a matrix Binomial Theorem: Meaning of nCr and its value. Binomial theorem for (x + a) n, Expansion. Finding constant term, co-efficient of xn , particular term and middle term(s). Logarithms: Definition of common and natural logarithms. Laws of logarithms. Vector Algebra: Magnitude of a vector, Types of vectors. Position vector, Addition and subtraction of vector in terms of line segment. Vector in a plane, Product of vectors. Scalar and vector product. Projection of a vector on another vector. Area of parallelogram and area of triangle. TRIGONOMETRY: Definition of an angle, radian, Relation between degree & radian, Trigonometric identities. Trigonometric ratios of standard angles, Meaning of allied angles. Trigonometric ratios of allied angles in terms of θ, Complimentary angles and relation between trigonometric ratios of complimentary angles, Express sum or difference of Sine and Cosine of an angles in to product form, Express product of Sine and Cosine of angles in to sum or difference form, relation between sides of a triangle and Sines, Cosines and Tangents of any angle (Sine rule, Cosine rule and Tangent rule), Projection rule, Half angle formulae in terms of sides of a triangle, Inverse Trigonometric functions. ANALYTICAL GEOMETRY: Definition of a point in a plane, Specification of a point using co-ordinate system, Points on X-axis and Y-axis, Derivation of distance formula. Section formulae, Mid point formula, Centroid, area of a triangle and collinear points, Problems. Locus of a point with respect to a fixed point and with respect to two fixed points and its equations, Inclination of a line with horizontal line and its slope, Intercept of a straight line, Slope of a line parallel to X-axis and Y-axis, Derivation of conditions for two lines to be parallel and perpendicular, "Angle between two lines, Point of intersection of lines. CALCULUS: Limits: Variables and Constants. Definition of function, Types of function, Direct and Inverse functions, Explicit and implicit function, Odd and even functions, Definition of limit of a function. Differential Calculus: Increment and increment ratio, Derivatives of functions of xn, sinx, cosx and tanx with respect to 'x' from first principle method, standard derivatives, Rules of differentiation: Sum, product and quotient of functions, Chain rule, Derivatives of inverse Trigonometric functions, Hyperbolic functions and inverse of hyperbolic functions, Implicit functions, Parametric functions, Logarithmic differentiation, Successive differentiation up to second order. Maxima and minima of a function. Integral Calculus: Definition of Integration. List of standard integrals. Rules of integration, Integration by substitution method, Integration by parts, Definite integral, Theorems on definite integral, Find area, volume and rm s value of a function. Differential Equations: Definition, order and degree of differential equation, Formation of differential equation by eliminating arbitrary constants up to second order, Solution of D E of first degree and first order by variable separable method. Solution of differential equations reducible to variable separable form. Linear equations and its solution. Solution of differential equations reducible to linear form-Bernoulli's form. Homogeneous form and its solution. Solution of differential equations reducible to homogeneous form. Exact differential equation and its solution.
Option -1 Electronics / Electronics & Communication (Diploma Level) Electronic Circuits: Power Supplies, Half wave, full wave and bridge rectifiers, voltage regulation, Regulators, IC regulators, UPS, types of UPS. Transistor biasing and small signal amplifiers, Transistor CE amplifier, Classification of amplifiers, Classification of FETS, Nchannel JFET, MOSFET, UJT, Tunnel diode, Optoelectronic devices, LDR, LED & LCD, photo diode & photo transistor, Feedback & Power amplifiers, Tuned power amplifier, Heat sink, Oscillators, RC phase shift oscillator, Wein bridge oscillator, tuned collector oscillator, Hartley, Colpitts, Crystal oscillator, Sweep circuits & Multivibrators, Boot-strap circuit, Miller sweep circuit, Current sweep circuit. Classification of multi vibrators, Astable, monostable and bistable multivibrators using transistors, Schmitt trigger, clippers and dampers, Operational amplifier, Timers & Phase Locked Loops, Differential amplifier. Communication Systems: Elements of communication system, TDM, FDM, Noise, Signal to noise ratio, Modulation techniques, AM & FM receivers. Transmission Lines and Wave Propagation, Electromagnetic waves, wave polarization and its types, reflection, refraction, diffraction, ground wave propagation, space wave propagation (LOS), sky wave propagation, ionosphere layers, critical frequency, MUF, virtual height, troposcatter propagation, Digital Modulation, Sampling theorem, pulse modulation, pulse code modulation, delta modulation, data compression, Data coding, asynchronous transmission, synchronous transmission, error detection and correction, Amplitude shift keying (ASK), frequency shift keying (FSK), phase shift keying (PSK), quadrature amplitude modulation (QAM), Multiplexing and multiple access techniques, Telephone modem, fax modem and data modem, cable modem, digital subscriber lines, ADSL, multiplexing and multiple access, FDM and TDM, FDMA and TDMA, spread-spectrum, code division multiple access (CDMA). Telephone System. Public switched telephone network (PSTN), manual and electronic equipment, EPABX, digital EPABX, FAX, Internet telephony. Antennas. Isotropic, half wave dipole antennas, Antenna arrays - broadside, end fire, Vagi Uda, log periodic, turnstile antennas, Parabolic reflectors, Dish antennas, VS AT and Cellular antennas. Microwave devices & Radars, Pulsed Radars, Duplexer, CW radar, radar Beacons, instrument landing system, Satellite Communication, Microwave link, classification of satellites, Geo-stationary Satellites, Fibre Optic Communication, Optical fibre, fibre optic cables, Splices, connectors, optical couplers, optical emitters (LED & LASER diode), optical detectors ( PIN diode & APD), Submarine cables, Cable television applications, Mobile Communication: Evolution of Mobile Radio Communication, Cellular systems operation, Digital cellular mobile system, GSM standard, GSM architecture, CDMA systems, EDGE technology. Networking & LAN Network topologies: bus, star, ring, circuit switching, packet switching, message switching, router, OSI Model, WLAN characteristics, Bluetooth, WAP applications, WAN and WAN Protocols, Internet, internet devices, repeaters, bridges, routers, gateways, ARPA net, www, internal architecture of ISP, high level architecture of an ISP, Ways of accessing the internet, PSTN ISDN, Leased lines, DSL, cable modems, TCP/IP, Use of IP address, IP datagrams, classes of IP addresses, ports and sockets, Web Applications Domain name system (DNS), Electronic mail, FTP, TELNET, proxy server. Digital Electronics: Basics of Digital Electronics Binary, Octal. Hexadecimal number systems. Binary codes, excess-3 and gray codes. Logic gates, Boolean algebra, Demorgan's Theorems. Implementation of logic expressions, Karnaugh maps, Logic families. Combinational logic circuits, Sequential logic circuits, Flip-flops, Synchronous and asynchronous circuits, Shift Registers, Parallel in parallel out, universal shift registers, ring counter and its applications, Binary counter- ripple counter, synchronous counter, up-down counter. Memories, RAM, ROM, EEPROM, UVEPROM, static RAM, dynamic RAM, Flash ROM, NVRAM, AID and D/A converters. Circuit Theory: Behaviour of Passive Components and Resonance in A.C. Circuits Active and passive elements, Mesh Current and Node Voltage Analysis, Kirchoff"s laws, Mesh currents, Network theorems. Thevenin's theorem, Norton's theorem, superposition theorem, reciprocity theorem and Maximum power transfer theorem, Coupled circuits, Transient Analysis & Linear wave shaping circuits, Mutual inductance, Transient Analysis at RC & RL circuits, Transient analysis of series and parallel RLC circuits for over damping cases, pulse wave form, differentiating and integrating circuits. Microprocessors, Microcontrollers : Microprocessor, Basic Microprocessor instructions, Addressing modes, instruction format, RISC verses CISC, Architecture of 8086, minimum and maximum modes, flag register, interrupts, Super scalar architecture, Architecture of 8051, registers, timers, interrupts, fetch cycle, execution cycle, machine cycle, state, Instruction set of 8051, instruction format, classification of instructions, addressing modes- Groups of instructions, data transfer, arithmetic, logical, branch, Data transfer, single and multi byte addition and subtraction, subroutines, nesting, multiple ending and common ending, use of Input output and machine related statements, debugging, time delay program. Electronic Measuring Instruments: Analog instruments, PMMC Instrument, extending the range of instruments, series and shunt type ohmmeter, FET input voltmeter, differential voltmeter, Wheatstone, Maxwell, Schering Bridge. Q meter, Distortion Factor Meter, Digital Instruments, Digital voltmeter, Digital Multimeter, Digital frequency meter, Digital LCR Meter. digital IC tester, Logic analyser, spectrum analyser, Cathode Ray Oscilloscope, XY Plotter and Recorders. Signal Generators & Power meters, Audio and Video Systems: Audio Systems, Hi-Fi and stereo systems, disc recording and reproduction, magnetic recording and reproduction, optical recording, CD player, MP3 player, DVD player, TV Picture & Composite Video Signal Picture elements, Horizontal and vertical scanning, frame and field frequencies, Horizontal and vertical synchronisation, Horizontal and vertical blanking, T.V. Channel standards, Construction of composite Video signal, Linear scanning, standard scanning pattern. Flicker, sync Pulses, blanking signals. Monochrome and Colour Television, Additive and subtractive mixing of colours, Colour systems like NTSC, PAL, and SECAM. Colour TV Transmitter block diagram. Colour TV receiver block diagram (PAL). Colour video Signal processing, operating and service controls, colour picture tube, degaussing. Satellite and Cable TV Cable TV, DTH system, DTH receiver, HD TV. Industrial Electronics: Power Electronic Devices, SCR, Triac, Power BJT, IGBT, triggering of SCR using UJT, protection of power devices. Converters, AC Regulators & Choppers, Inverters, AC motors, DC motor control, Introduction-Speed control of DC shunt motor by using converters and choppers, speed control of induction motor by using AC voltage controllers, V/F control (Converters and invertors control). Transducers, strain gauge, variable resistance transducer, capacitive, inductive, piezoelectric, LVDT. Thermocouples, Transducer applications, accelerometers, Tachogenerators, Servomotors Computer Hardware: Motherboard, component layout, chip set, slots, serial port, parallel port, USB port, connectors, RAM, cache memory, HDD, FDD, sound card, Video grabber card, network card, Peripherals - Monitor, Keyboard, and mouse, Working of dot matrix, laser and inkjet printers, Scanner - JPEG, MPEG - digital camera, CD writer, DVD player, Flash Drive, Windows Operating System, Power On Self Test, BIOS, Booting, autoexecutable batch file, config.sys file, windows registry, Device manager, control panel, viruses, PC assembly and Software Installation, Assembling PC, CMOS set up, Installation of OS, Installation of device drivers, system tools.
Option-2: Computer Science/Information Technology (Diploma level) Digital logic design: Digital circuits, Digital ICs, Comparison of TTL, CMOS and ECL logic Families, Number System - Binary, Octal, Decimal, Hexadecimal number system, BCD code, BCD arithmetic (addition, subtraction), logic gates, Basic laws of Boolean algebra, Duality theorem, De Morgan's theorem, Combinational logic Design, K-map representation of logical functions and minimization, standardization of SOP & pas, Half adder and full adder, Half subtractor and full subtractor, Binary parallel adder, BCD adder, Multiplexers (4:1 and 8:1), Demultiplexer (1:4; 1:8; 1:16), Encoders and Decoder, Design of different code converter, BCD to 7 segment decoder, Comparator, Parity Checker and Generator, Flip Flops And Sequential logic Design, One-bit memory cell, concept of clock signal, Triggering: edge triggering and level triggering, Excitation table of different Flip-Flop, Asynchronous counter (3 bit, 4 bit), mod N-counter, Synchronous counter, Shift register: SISO, SIPO, PISO, PIPO (4- bit) and Universal Shift register (4-bit), Classification of memories RAM, ROM, PROM, EPROM, EEPROM, Static and Dynamic RAM, A-D And D-A Converters Computer Organisation and Architecture: Basics of Computer system, Von Neumann Architecture and its features, Structure of CPU, function of Memory unit and IO unit, Concept of PC, Laptop, workstation, Server, Super Computer, Instruction structure and addressing modes, Execution steps of a typical instruction through different parts of CPU and memory, Different addressing modes, Memory and IO devices, Memory Hierarchy model, Cache memory, Mapping technique, Hit ratio, Replacement algorithm, virtual memory technique, address translation method, TLB, Programmed IO or Status check IO, Interrupt Mechanism, DMA data transfer, IO processor, Different types of interrupt, Priority interrupt, Simultaneous interrupt, DMA transfer modes, Control unit design issue, Hardwired Control unit design, Micro programmed Control unit design, Horizontal and vertical microprogramming, RISC, CISC architecture and pipelining, instruction pipelining. Computer Networks: Network Models, Data and Signals, Bandwidth Utilization, Transmission Media, Switching, Error Detection and Correction, Data Link Control, Multiple Access, Wired LANs: Ethernet, Connecting LANs, Backbone Networks and Virtual LANs, Network Layer: Logical addressing, Network Layer: Internet Protocol, Network Layer: Delivery, forwarding and routing, Process to process Delivery: UDP, TCP, Congestion Control, Domain Name System, Remote Logging, Electronic Mail and File Transfer. Data Structures using C: Pointers, Dynamic Memory allocation, Files, data structures, The Stack, Queues, Linked lists, Trees, Sorting, Searching. Database Management Systems Databases and database users, Database System Concepts and Architecture, Data Modelling Using the Entity-Relationship (ER) Model, Relational Data Model and Relational Database Constraints, The Relational Algebra, SQL: Schema Definition, constraints, queries and views, Functional Dependencies and normalization for relational databases, transaction processing concepts and theories, Concurrency Control Techniques, Database Recovery Techniques. Object Oriented Programming with C++: Object Oriented Programming, C++ Additional features, Classes and Objects, Operator Overloading, Inheritance, Virtual functions, Managing Console I/O Operations, Files, Templates. Operating System: Process management, Synchronization, Deadlocks, Memory management, Virtual memory management, File system.
Knowledge of Central Government Rules and Procedures / Instructions Syllabusa) Maintenance of Cash Book
b) Preparation of Bank Reconciliation Statement
c) Posting of Ledger Accounts
d) Preparation of Trial Balance and Final Accounts
e) Principles of Auditing
f) Income Tax and Service Tax Rules
g) General Financial Rules
h) Fundamental Rules & Supplementary Rules.
i) CCS (Pension) Rules and New Pension Scheme
j) TA and LTC Rules
k) Medical Attendance Rules
l) Provident Fund Rules
m) Gratuity Rules
n) Delegation of Financial Power Rules
o) CCS (Joining Time) Rules
p) Right to information Act, 2005 and Right to Information (Regulation of Fee and Cost) Rules
q) Matters concerning Land and Building, Government Residential Quarters, Staff Cars
r) Contingent expenditure